Le PolyFlex™ est un filament flexible simple à imprimer. Avec une bonne élasticité et une bonne résistance aux stress ce filament ouvre de nombreuses possibilités d’applications.
Glass Transition Temp
1.17 – 1.24 g/cm3
1.75 mm or 2.85 mm
± 0.05 mm
(Typical ~ ± 0.02 mm )
General Printing Settings
Recommended printing temperature:
220 – 235 °C (Diameter of 1.75 mm)
220 – 235 °C (Diameter of 2.85 mm)
Recommended 3D print speed:
30 – 90 mm/s
Recommended heated bed temperature
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc.
Flexible : PolyFlex™ features a “Shore A” hardness of 90-95A and a large strain-to-failure of over 400%. These aren’t just figures on a page, but are tested values obtained from actual printed parts. What this means is that PolyFlex™ gives you cool flexible parts with no worry about the part breaking. PolyFlex™ is truly your best tool for creating fun flexible parts.
Printer Compatibility: One of our main goals when developing PolyFlex™ was to make it easy for everyone to use. Flexible filaments are known to be difficult to work with. Well not any more. PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification. Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.
Flex-up Your Imagination : The soft and flexible nature of PolyFlex™ opens up a new dimension of what one can do with desktop 3D printers, clothing, shoes, wearables, prosthetics…you name it. The possibilities are endless.