Précédent
Image du produit précédent

Extrudeur CR10

 86,03 TTC
Suivant

Feeder BondTech pour Ultimaker 2

 174,48 TTC
Image du produit suivant

Systême direct drive pour CR10s

 278,99 TTC

Ce systême direct drive de Bondtech est un extrudeur direct drive en 1.75mm haute performance avec une tête full métal pour les la gamme CR-10S.
La combinaison entre la technologie double engrenage de bondtech (de l’extrudeur BMG) et de la tête de chauffe E3D V6 offre la possibilité d’imprimer une plus grande variété de matériaux.
Le boitier est imprimer en PA12 pour une résistance et précision optimale avec la technologie SLS.
Comme toutes les unités sont testées avant envoi, cette amélioration est fournie entièrement assemblée.

Rupture de stock

UGS : IdeaTo3d_9082 Catégorie :

Description

Ce systême direct drive de Bondtech est un extrudeur direct drive en 1.75mm haute performance avec une tête full métal pour les la gamme CR-10S.

La combinaison entre la technologie double engrenage de bondtech (de l’extrudeur BMG) et de la tête de chauffe E3D V6 offre la possibilité d’imprimer une plus grande variété de matériaux.

Le boitier est imprimer en PA12 pour une résistance et précision optimale avec la technologie SLS.

Comme toutes les unités sont testées avant envoi, cette amélioration est fournie entièrement assemblée.

Le systême direct drive (DDS) de Bondtech pour la Cr-10S est conçu pour offrir plus de possibilités aux utilisateurs:

  • Plus grande variété de matériaux imprimable
  • Flow plus haut ou buses plus large
  • Couches plus fine
  • Qualité d’impression améliorée

Le DDS contient un extrudeur BMG et une tête full métal E3D V6. Le design permet une ventilation plus éfficace du corps de chauffe. Pour la facilité d’installation  le systême est pré-cablé et prêt à installer. Il ne faut pas de cables en plus, ni de soudures.

Le détecteur de filament est différent pour permettre au filament de passer dans les deux sens.

Le design est inspiré du travail de Greg3D’s “The Tank” Retrouvez son travail ici: https://www.thingiverse.com/Greg191134/about.

 

(en cours de traduction)

BONDTECH DIRECT DRIVE SYSTEM

This all-in-one solution is easy to install and ready to use. Bondtech’s DDS uses our unique Dual-Drive technology with an internal gear ratio of 3:1 and 415 steps per mm. Our DDS also uses an E3D’s V6 HotEnd that allows to easily print a wide range of filaments from the market with less stringing and clogging with processing temperatures up to 285°C.

Study and test was put on the design of the housing as well. Its geometry allows for effective cooling of the HotEnd by perfecting the placement of the Sunon 4010 axial fan and the orientation of the cool air flow. Along the cooling of the HotEnd, we also achieved a more effective part cooling by using a Sunon 5015 Radial Fan and a fan shroud that focus the air flow right to the tip of the nozzle. The filament sensor housing was also redesigned. You can now properly attach it to the CR-10S with a strong grip. The steel ball we placed below the lever on the filament path, lets you feed material in booth directions, during loading and unloading. Much work was put on the power cables management and setup. Everything is ready to plug-in. No need to cut or solder. The old cables and components required to be removed, will remain intact and able to be reused.

MULTI-MATERIAL CAPABILITY

Our Bondtech extruder feeds all material with high reliability, from slippery nylons and soft TPU/TPE filaments to highly rigid and sometimes brittle carbon-filled high-strength materials. The extruder is designed for 1.75 mm filaments but has been tested to ensure performance of filament from 1.5mm up to 2.0mm allowing for high reliability regardless of the tolerance of the filament used. The V6 All-Metal Hot-End from E3D allows users to reliably print high temperature materials (up to 285°C) and it gives extra functionality to work with soft and flexible filaments. This combination opens up a wide range of opportunities for your Creality3D CR-10S.

BONDTECH DUAL-DRIVE

Our unique Dual-Drive technology delivers uninterrupted material flow without fear of grinding or slipping in even the most demanding conditions. Bondtech users allover the world will attest that even in prints with thousands of retracts our extruders perform flawlessly, with unmatched precision, and zero damage or degradation to the filament.

Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions.

BL TOUCH READY

Bondtech’s Direct Drive System for CR-10S is BL Touch ready. The housing includes the mounting holes to attach this popular bed leveling sensor used by Creality3D in many models. You can 3D print a mount, designed by Greg3D, and screw it in to attach the BL Touch. Visit our BL Touch installation Guide to learn step by step how to do it.

In our Guide we show how to attach the BL Touch to the DDS for CR-10S, and provide a link to other Guides on how to finish the cables connection and firmware settings.

Before buying a BL Touch check these installation guides. Keep in mind that different versions of the Creality3D CR-10S and BL Touch will require adjustments to the connections and firmware setups.

Customers' review

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Reviews

There are no reviews yet.

Be the first to review “Systême direct drive pour CR10s”

Informations complémentaires

Poids 0,5 kg

Panier d’achat

1

Sous-total :  197,59 (TTC)

Voir le panierCommander