PolySupport™ is a material designed to solve one of the most intimidating problem in desktop FDM/FFF 3D printing: support. PolySupport™ generates support structures that can be easily removed by hand.
1.20 – 1.25 g/cm3
1.75 mm or 2.85 mm
± 0.05 mm
(Typical~ ± 0.02 mm )
General Printing Settings
Recommended printing temperature
225 – 235 °C (Diameter of 1.75 mm)
225 – 235 °C (Diameter of 2.85 mm)
Recommended printing speed
≤ 50 mm/s
Recommended heated bed temperature
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc.